41 SHIPLAP Ideas: NOT Just For Walls (Part 2)

If you are a modern farmhouse, beach house coastal , or cottage chic kind of girl, then shiplap is your new best friend.  If you didn’t know much about shiplap before Joanna and Chip Gaines started HGTV’s hit TV show “Fixer Upper,” you DO NOW.  41 Shilap Ideas:  NOT Just For Walls (Part 2).

Shiplap is the perfect combination of rustic warmth meets casual elegance, and can be incorporated into almost any decor style.  If you wan to learn more about shiplap Click  The Shiplap Guide:  Shiplap, Tongue & Groove, and Plank Walls (Part 1).

***UPDATE***  I am so excited for the final reveal – part 3 is now ready!!  Click Adding A Shiplap Feature Wall to Living Room to see our completed project. 

So, now that you know what shiplap is, you’re probably needing some ideas on how and where to use it- right?  Well, you’re reading the right post.  Here are 41 inspirational pictures to get you motivated!!

***  I am using the term “shiplap” in this post as a collective term that incorporates all 3 methods for getting the “shiplap look”.   These pictures will either use 1. shiplap, 2. tongue & groove, or 3. plank methods (see post 1).  Just wanted to clarify***  SO…..LET’S GET GOING!!



source: thetarnishedjewelblog.com



Use shiplap in the living room behind shelves,  as an accent wall, above the fireplace, behind built ins, or on a TV wall. 

It adds just enough texture to balance out smooth surfaces (like electronics, lighting, and curtain rods), and gives the room an instant focal point.












source: goodhousekeeping.com


source: homecorner.eu


source: countryliving.com


source: instagram.com (max crosby construction)



source:  private



Use shiplap with almost any decor style:  coastal, farmhouse, shabby chic, cottage, rustic, modern, industrial, and so on. 

Use it on ceilings or behind the bed to add drama, or use it on headboards/ bed frames to add instant character.









source: lollyjane.com (joanna gaines)


source: thegoodhomeinteriors.com


source: wdesign.com


source: instagram (the old house on main)


source: sitehouse.net


source: eclecticcottage.blogspot.com



source: georgianadesign.tumblr.com



Use shiplap horizontally or vertically.  The horizontal lines add visual width, whereas the vertical lines add visual height.  It looks great behind vanities and free standing tubs. 

Afraid to commit?  Use a small amount (like a half wall) around the tub or in a small half bath/powder room.












source: christinasadventures.com


source: mybetterhome.org


source: private


source: countryliving.com



Shiplap is extremely versatile.  It can be painted, stained, white-washed, left natural, or sanded and sealed – to name a few. 

Paint shiplap white for a fresh clean look or paint it dark for a moody, dramatic look.  Leave shiplap natural (knotty and raw) for a rustic look.













source: bhg.com


source: bluenestdwellings.com


source: private
( A Well Dressed Home)


source: houseofturquoise.com



source: favoritepaintcolors.blogspot.com
(Four Generations One Roof)

Use shiplap on entry or staircase walls.    It gives your guests a glimpse of your decor style and what they can expect to see in the rest of your home.

Shiplap also adds architectural detail to small areas, where there is minimal space to place furniture.

Use shiplap in the hallway as an accent wall, or as a hidden door for the powder bath.  It adds a little excitement to an area that is usually left bare.








source:  instagram.com (park & oak design)


source: google.ca


source: barndoorslidinghardware.net


source: thecreativityexchange.com


source: either-orr.com



source: magnolia market (joanna gaines)





The kitchen gives you a ton of options to use shiplap.  Use it as backsplash, on kitchen islands, in bay window nooks, as pantry doors, barn doors, or wrapped columns. 

Use small boards or wide boards to get the “look” you want.  Most common boards widths used for shiplap are 6″, 8″, or 10″.











source: homebunch.com (advanced renovations, inc.)


source: roost-blog.com


source: klighting.org


source: private


source: theinspiredroom.net


source: bellezaroom.com



source: studio-mcgee.com



Use shiplap in unexpected places like laundry rooms and mudrooms.  These rooms are not typically seen by guests, but  can still be beautiful 🙂  Plus, you might need a little inspiration while you work- LOL!!

Use it outside in patio/entertaining areas to bring the warm & welcome feeling outdoors.  These areas will feel more like extensions of your home, than feeling separate or cold.











source: onekindesign.com


source: instagram.com (cement tile shop)


source:  handywood.net


source: buffalolumber.com



source: foxhollowcottage.com





If you still aren’t sure if you want to add shiplap as a permanent structure, try it out as an accent.  It looks great (picture to the left) lying against the wall, and also in a frame (picture below). 

It will add the character and charm you want without adding anything permanent to the wall.

No matter which one of these shiplap ideas you decide to try, you will have a little taste of how shiplap makes your home FEEL!!  And I know your guests will notice it too 🙂







source: naptimedecorator.net



P.S.  Which one is your favorite??  Shoot me a comment….I’d love to know!


Want more SHIPLAP inspiration follow me on pinterest:  pinterest.com/toojewels/shiplap-love/

Related posts try:

Natural Brick Fireplaces

Home Tour:  Summer Dining Room

Master Bath Remodel

Want more DECOR TIPS click:

10 Ways to Add Buffalo Check

Opening up Kitchen Wall to Dining Room

12 Kitchen Upgrades.

***UPDATE:    IT IS COMPLETED (part 3) ***  

I am so excited for the final reveal – part 3 is now ready!!  Click Adding A Shiplap Feature Wall to Living Room to see our completed project.   

This post is filled with tons of pictures from our shiplap feature wall, shiplap fireplace, painted white brick fireplace surround, and shiplap bookshelf built-in.  

Sneak Preview….below 🙂 

source: thetarnishedjewelblog.com


































































































Continue Reading

The Shiplap Guide: Shiplap, Tongue & Groove, and Plank Walls (Part 1)

I have been very excited to do a post on shiplap (for awhile now) since we will be adding it to our fireplace wall in our living room- very soon!!  So, like all good pinterest junkies do…..I started filling up my pinterest board with all things shiplap. 

But after scrolling and saving pictures/ideas, I was beginning to feel a little confused of what shiplap really is.  There are like a million posts on shiplap: diy this way, diy that way, and other helpful tips/advice, etc…. but I just wasn’t getting the information I needed. 

So, what does every crazy obsessed home decor blogger do…..they do a little research.  And the more I dug, the more I found…..and let me tell  you – there is a ton of information!!!  There is so much information, that I decided to break up the shiplap post into 2 posts. 

***Update.  41 SHIPLAP Ideas:  NOT Just For Walls (Part 2) is completed.***


source: roost-blog.com


***Disclaimer- I am not a professional on wood milling – LOL!!  This post contains information that I have gathered through personal research so that I can help you understand all of this shiplap mania  – thnx ***









For the purpose of this post, and to keep things simple, we will focus on 3 methods to add “shiplap” to your house.  I will not go over applications, supplies needed, cost, etc.  (there will be links to help you with that).

This is an informative post on wood types used.   And I’m assuming all of us want to learn what it is, so we can make an educated decision when adding it to our home- right??!!

So, what did my results show?

The THREE most popular ways to shiplap walls use one of these methods:

1) Shiplap method

2) Tongue & Groove method

3) Plank wall method



The methods may vary from: square edge to beveled edge boards, width or length of boards used, or thickness of plywood/MDF variations to solid planks, but the concept is the same. 

The one thing that changes is how they look on the wall…..just not every single time.  And that is why the shiplap and the “shiplap look” has gotten a little confusing.






What is shiplap?

Shiplap is a beautiful marriage where old meets new, smooth meets texture, and clean lines meet graceful movement……and that is why it is popping up in the majority of remodels and new builds everywhere.



According to Merriam-Webster dictionary – Shiplap is defined as “wooden sheathing in which the boards are rabbeted so that the edges of each board lap over the edges of adjacent boards to make a flush joint.”

OK…now in English.  Each board has two rabbeted (CUT) edges —one on top, one on bottom (see picture to left).  The top edge of one board will LAP over the bottom edge of the 2nd board to make a flush joint (picture below – right).

These Shiplap boards were originally designed as a type of siding for exterior structures like barns, woods, and sheds.  They kept the water out, and were attached at different angles to let water run off the structure it covered. 

FUN FACT:  wooden boards (all types) were used for siding until plywood was invented.






The boards are cut with either 1/2″-3/4″ “edge” (size of edge) …….depending on the width of the board ……(6″, 8″, 10″) to create a tight seal to keep water out and allow the wood to breath – Buffalo-Lumber.com. 

This website has a lot of information on all types of sidings (if you are interested to learn more).






NOTE:  There are several types of cuts made for shiplap boards, but to make things easier for this post I will focus more on the square edge.

Two of the cuts used for SHIPLAP boards are:

1- square edge (1st picture below) and 2- beveled edge (2nd picture below).

In the first picture, the “E” is the LAP. ….you know like ship-LAP?  😉  This is where that cut will be either 1/2″ – 3/4″ long .  In the second picture “F” is the beveled (angled) part.  Can you see the difference in the look of the edges – straight vs. angled?


source: buffalo-lumber.com


source: buffalo-lumber.com


source: theharperhouse.com



This gives you a better idea of what the square edge shiplap looks like when attached to the wall, and how the boards LAP over each other.

The picture comes from an awesome DIY job by The Harper House!!!  I Love how it turned out.  If you want to see more of this shiplap update, click on the link below the picture.  This is a great post with lots of information!







Now, just when you thought you were catching on to shiplap, things begin to get a little trickier.  Stay with me here…..  There is a popular trend happening within the shiplap method itself. 

It is called the nickel gap pattern – attaching shiplap without the flush joint. There is a GAP in the LAP!!! LOL!! The “G” on the picture below shows the GAP- (there is a space on this pattern, where the original shiplap pattern has no space.

FUN FACT:  The most common space between the board is 3/16″ – 3/8″ long…..the size of….drum roll please….a NICKEL.  Buffalo-Lumber.com.  You will see that nickel pop up again in the plank wall method 🙂

source: buffalo-lumber.com


source: windsorone.com



Below are some pictures of shiplap (square edge) with complete “flush joints”- no gaps, and then with the 3 other noted gaps. 

The gaps give it a different kind of look- can you see it?   There is space between each board on top, and on the bottom.

I just wanted to let you know it exists so you are informed of it, but will not go into it any farther.  Just food for thought.







Second method:  WHAT IS TONGUE AND GROOVE ???


The tongue and groove board has a nitch (tongue) on one side and an opening (groove) on the other side so that they join together tightly.  On the picture to the left you can see how the tongue and groove board has openings that look more like a puzzle piece. 

The tongue side of this board would fit into the groove side of the adjoining board.  This is different than the shiplap…..where those boards overLAP each other, and here they “FIT OR JOIN” together.





source: woodsource.com


In the profile pics below, you can see the square edge and beveled (eased edge) tongue and groove patterns and what they look like.  This gets technical very quickly on all the measurements, cuts. etc….and definitely over my pay grade. 

I just wanted you to see that the tongue and groove boards also have the different edges (like the shiplap).






source: eastteak.com


This picture gives you a better idea of comparing the shiplap to the tongue and groove (rainscreen won’t be discussed- it was just a great pic)!

You can see the square edge on both of the board profiles side by side.  It also shows the difference in how they are attached to the wall- look at the nail placement. 

The shiplap is attached with straight nails, and the tongue and groove is attached with angled nails.  Just a FYI.


The picture to the LEFT below shows the tongue and groove and how it joins together. This beveled (angled) edge on the board is very small like the micro eased bevel edge on the profile picture above (pic #3).

On the picture to the RIGHT below you can see this beveled edge is more pronounced than the picture to the left.  The angle creates a “v” look, which is like profile picture above (pic #1).












In both pictures you can tell how the tongue and groove joint looks more like puzzle pieces fitting together; they have tighter joints which provide stronger joints.


Third Method:  WHAT IS A PLANKED WALL???

The plank wall is made with boards that have not been rabbeted, nor have tongue and groove.  This type of “shiplap look” seems to be the most popular for the diy’ers – since you have less cuts and easier cuts per board (compared to shiplap or tongue and groove boards).

DIY’ers can also achieve the “shiplap look” for less money using plywood or MDF (medium density fiber board) sheets.  They use large sheets that are 1/4″ or 1/2″ thick, and then cut them down to the specific widths (6″, 8″, 10″ boards) they desire. 

The thinner boards are easier to attach to the wall since they aren’t as heavy, and the skill level needed is less than it would be for the other 2 methods.






Here are pictures so you can the plywood planks and tongue and groove side by side.

This is an awesome post with great advice from someone who has experience using both plank and tongue and groove methods in her home.  Click under the picture to read her full story- she has a ton of important info to share.

source: 4men1lady.com
source: 4men1lady.com













Through my digging, I have noticed that the plank wall can be installed flush (board to board), or with a gap (similar to the nickel gap mentioned above with shiplap). 

DIY’ers are actually putting nickels (or coins) in between the planks to mimic the shiplap look.  See pictures below and click on links for more information, tips & advice.

source: mylove2create.com



source: sypsie.com












Hope you are feeling like a Shiplap, Tongue & Groove, and Plank EXPERT!!  Sorry it was sooooo long….I just didn’t want to leave anything out that might be important in helping you make your SHIPLAP DREAMS COME TRUE!!

  ***UPDATE…… Part 2 is completed!***  41 SHIPLAP ideas:  NOT Just For Walls (Part 2)


Have A Very Merry Christmas and Happy New Year 2018!!! 

Love & Hugs 🙂


Recommended Posts:

12 Best Modern Farmhouse Bar Stools

55 Incredible Barn Door Ideas:  Not Just for Farmhouse Style

35 Natural Brick Fireplaces, 30 Stunning White Brick Fireplaces

Opening Kitchen Wall to Living Room

10 Ways to Add Buffalo Check














Continue Reading